Surface Contour Machine's maintenance and care:

1. Clean the surface of the tool, stylus and guide track with a high weave cotton cloth moistened with anhydrous alcohol before switching on the machine and after measuring every day.

2. Switch off all power supplies when not in use, and put the protective cover on the stylus.

3. It is strictly forbidden to sweep the ground with a broom to avoid raising dust.

4. Complete maintenance and accuracy adjustment for the instrument.

Contour measuring instrument's maintenance instructions:

1. When the measurement is done, exit the system, turn off the computer and cut off the power supply;

2. Clean the table and fixture with cotton and aviation gasoline after measurement, and apply anti-rust oil;

3. Pay attention to the instrument accessories to prevent rust;

4. Clean the guide rails regularly to ensure the accuracy of the rails.

Be proficient in the performance, operating procedures and general knowledge of maintenance of instruments and equipment. Ensure the normal use of instruments and equipment, maximise the benefits of all instruments and equipment, improve the utilisation rate, conscientiously do the maintenance of instruments and equipment, according to the different nature and requirements of the instruments and equipment, do a good job of dust, moisture, shock and corrosion prevention, etc., so that the instruments and equipment to maintain the proper performance and precision. In case of any malfunction, damage and other abnormal conditions, please contact the maintenance department timely for maintenance. For instruments and equipment that cannot be maintained, professional after-sales service technicians should be connected to carry out maintenance work.

For more information about Wilson Roundness Machines, please visit: www.hhwjjxshh.cn